Earnings Transcript for PCT - Q2 Fiscal Year 2023

Operator: Good day and thank you for standing by. Welcome to the PureCycle Technologies Second Quarter 2023 Corporate Update Call. At this time all participants are in a listen-only mode. After the speakers' presentation, there will be a question-and-answer session. [Operator Instructions] Please be advised that today conference is being recorded. I'll now like to hand the conference over to Charlie Place, Director of Investor Relations. Please go ahead.

Charlie Place: Thank you, Anton. Welcome to PureCycle Technologies second quarter 2023 corporate update conference call. I'm Charlie Place, Director of Investor Relations for PureCycle and joining me on the call today are Dustin Olson, our Chief Executive Officer; Larry Somma, our Chief Financial Officer; and Dan Coombs, our Executive Chairman. This morning, we will be highlighting our corporate developments for the second quarter and subsequent to quarter end. The presentation we will be going through on this call will also be found on the Investor tab at our website at www.purecycle.com. Many of the statements made today will be forward-looking and are based on management's beliefs and assumptions and information currently available to management at this time. These statements are subject to known and unknown risks and uncertainties, many of which may be beyond our control, including those set forth in our Safe Harbor provisions for forward-looking statements that can be found at the end of our second quarter 2023 corporate update press release and our quarterly report on Form 10-Q filed yesterday evening as well as in other reports on file with the SEC that provides further detail about the risks related to our business. Additionally, please note that the company's actual results may differ materially from those anticipated and except as required by law, we undertake no obligation to update any forward-looking statement. Our remarks today may also include preliminary non-GAAP estimates and are subject to risks and uncertainties including among others things, changes in connection with quarter end and year-end adjustments. Any variation between the PureCycle's actual results and the preliminary financial data set forth herein may be material. You are welcome to follow along with our slide deck or if joining us by phone you can access it at any time on purecycle.com. We are excited to share updates from the previous quarter with you. I will now turn it over to Dustin Olson, PureCycle's Chief Executive Officer. Dustin?

Dustin Olson: Yeah. Thanks a lot Charlie. Thank you everybody for joining the call. Q2 was the most exciting and rewarding quarter in PureCycles history. Ironton is operational. This is the moment that we've worked toward for the last decade. We shared a lot of moments together from receiving the Procter & Gamble license, building the feedstock evaluation unit, financing Ironton, going public and now proving the technology at scale. This is a key moment for our future. The first plant is always the most challenging and the most special, but now we have a fundamental understanding for how we grow reliably into new regions, reduce our cost structure, build bigger plants and get more efficient on capital projects. With this progress, we can now start realizing PureCycle's potential. Remember, PureCycle takes the world's most popular and least recycled plastic polypropylene and converts it into a premium ultra-pure product. Our technology capitalizes on strong feedstock flexibility, a low variable cost and produces a high-value product. The world needs technology like this. The world needs a story like this, consumers all around the world are begging our industry to find solutions like this PureCycle is the answer. As you know, we accomplished the first two bond holder milestones and for the first time, produce pellets at commercial scale. We are well positioned to accomplish the remaining milestones. Ironton is running and raising production rates every day. I wish I could have been there. I wish you could have been there when we first produced our pellets it was a remarkable achievement for everyone and a tangible product of the hard work we've all put in. Everyone on-site will remember that moment for the rest of their lives. During the day, we cut a quick video to capture the moment and I was clearly excited. I was excited for two reasons

Dan Coombs: Thank you, Dustin. I'll try to give you some perspective on project completion, commissioning and start-up from my 45 years of industry experience. I will discuss how and why such observations are relevant for this project from that industry perspective. Typical commissioning periods for complex technical facilities similar to this one take between three and six months. New technology generally takes more time and effort to commission and start up compared to proven technology. This project reached mechanical completion April 24. We are 3.5 months past mechanical completion. Given the novel nature of our process, getting to this point inside the early portion of industry commissioning norms is a strong result and a successful outcome. The commissioning and early operations phase of a facility are really about understanding and addressing any key issues that might keep the plant from consistently producing at full capacity. Safety is always the top focus during this stage. We believe that safety leads and results follow. Commissioning success is driven by safety and finding and fixing issues. Any plant that contains miles of pipe and thousands of complex instruments, controls and pieces of equipment will have some issues that require quick solutions. Our plan was no different. The majority of our issues were normal equipment and control issues common to any startup. There are many reasons that we've made such good progress since mechanical completion. First, is our talented team of people at Ironton and within the company, second, our dedicated and committed partners; third, our born digital philosophy; and four, our capability of finding solutions. I've been part of many projects and results and the results of this team are as good as any I've seen. Project start-ups follow an S-curve. It's not linear. So it's always slow at the start at leaving the gate, and then it goes faster. However, there is nothing normal about the team in Ironton. It is rare to see a team so singularly focused and aligned on a mission. PureCycle hired a mixture of operators, craftsman, engineers, scientists, finance and business people to form this company. Most of our people have had excellent experience with industry leaders. This gave us a jump on setting up robust processes for safety, environment, training, quality, reliability and operations in general. All PCT people are committed and focused on the mission to solve plastics waste. They're proud to talk about what they do with their families and the community. This sense of pride and mission are key to our teamwork and drive this team to win. Not only did we find excellent people, but these people also work remarkably well together. In my many years within the industry, I've worked with a lot of top teams on big projects and managed a lot of plants. This team is as good as any I have worked with in my career. They look for ways to help each other. They look for ways to solve problems rather than make excuses. They check [indiscernible] at the door and they listen and cooperate with each other. They make personal sacrifices to support the mission. They're committed to safe operation and making PCT successful. Our team is a key reason why we were making the progress that we're making. I could not be prouder of this team or the opportunity to participate alongside them with them to bring this technology to the market. Dustin, thank you for letting me share my thoughts about this project.

Dustin Olson: Thank you, Dan. We're lucky to have you, and we appreciate all of your support. While most of the company was focused on getting Ironton operational, we did move the needle forward with respect to our growth strategy. With respect to Augusta, we closed the key documents to secure the land, which now clears way for us to begin site work activities. We expect this work to start in Q4 and continue through Q2 of 2025. As you recall, there are several concerns with respect to securing the Augusta land in the last two quarters that is now resolved. Now that Ironton is operational, we have clear access to land, our project can accelerate. We're incredibly excited about the future plant in Augusta and the recycling capacity that we can bring online. Europe is also on track. We closed the tender process for Antwerp, have commenced both engineering and permitting activities. We expect to close the permitting process in 2024. Our JVs also continue to move forward. Both Mitsui and SK geo centric sent teams to Ironton for site tours that supported the development of both projects. We intend to establish inventory locations in Antwerp and in Singapore in order to seed future sales for Europe and Asia. We will use the flexibility in the Ironton contracts to make volume available for export. We will add inventory in Antwerp and then one to two quarters later plan to move to Singapore. We're currently developing the internal work processes and third-party contracts to establish this operation. I will now turn it over to our CFO, Larry Somma for a financial update.

Larry Somma: Thank you, Dustin. I'm really pleased with the financial progress that we made during the quarter. At the end of May, the Augusta Economic Development Authority formally approved our plan of financing for one line in Augusta, which officially closed the forbearance that had previously been in place. Subsequent to that, on June 30, we executed an economic development agreement related to our plans to construct the Augusta facility. Pursuant to the EDA, PCT expects to receive certain property tax abatement benefits as well as certain other incentives, including site infrastructure development assistance. We are excited about our plans for Augusta. And with the technology risk removed with pellet production in Ironton, we expect to accelerate our project financing efforts as we believe that removing the tech risk will improve our cost of funding. We have also continued our efforts to raise funds as we have interested parties for the remainder of our PreP certification equipment. We are hopeful to provide details soon, but in the interim, we were able to extend the maturity of our undrawn revolving line of credit with Celebrity [ph] Capital from June 30, 2024, to March 31, 2025. Our objective has always been to ensure sufficient capital to advance our strategic initiatives, while allowing ourselves the time needed to execute a capital-efficient project financing plan for Augusta. We ended the quarter with just over $366 million in cash and available liquidity, which includes $150 million of unused borrowing capacity on our line of credit. As a reminder, during the quarter, we closed two non-dilutive financing transactions for a net amount of $47.6 million. Our corporate and preoperational employee cash used was $9.9 million during the second quarter, which was an increase from the prior quarter primarily due to the delayed payment of a portion of our 2022 bonuses compared to the previous quarter. We used $12.5 million of cash during the quarter, for normal corporate operations such as insurance, Ironton start-up working capital, professional fees and various other expenses. Additionally, we continue to make investments in our Ironton, Augusta and PreP facilities, which were funded primarily from the nondilutive financing transactions. Now let me comment on our budget for completing the Ironton project. As noted in our 10-Q filing last night, PureCycle anticipated as of June 30 that the remaining investments in 2023 to complete the Ironton facility could range from $10 million to $22.5 million. This range is dependent upon various contract contingencies and their ultimate resolution. We believe that we can recapture funds from some of the contractors on the project. But the most important point is that we've already spent or forecasted the need for a total of $22 million, which means that any positive resolution to contract contingencies should be favorable to our future cash forecast. Now I'm going to return the call to Dustin for his final comments.

Dustin Olson: Thank you, Larry. Look we continued to execute on both near and long terms goals. We completed the first two milestones with the bond holders, the questions regarding PureCycle's core technology have been addressed and answered. We closed the AEDA land transaction on 30th of June, which paves the way for our North American growth strategy. We extended the $150 million revolving line of credit through March 31, 2025, and closed two nondilutive financing transactions for a net amount of $47.9 million. We continue to set the stage and advance our international projects in Antwerp, Belgium, Ulsan, South Korea and Japan. We look forward to updating the market with respect to the upcoming milestones achieved and completing the start-up process of our flagship Ironton facility and the Augusta financing process as soon as possible. Thank you, everyone, for joining the call today. At this time, we'd like to open the call to questions.

Operator: Thank you. We will now conduct the question-and-answer session. [Operator Instructions] Our first question comes from Hassan Ahmed from Alembic Global Advisors. Please go ahead.

Hassan Ahmed: Good morning, Dustin and Larry. First, a comment followed by a question. Look, I mean, historically, there were a bunch of cynics out there with regards to the PCT story. And the cynical stuff that they would talk about was whether or not the technology works, whether it's scalable or not. So clearly, you guys have proven them wrong with commercial production starting and the like. So that's obviously the comment that I had to make. But in terms of my question, as far as your core technology goes, the core technology working at scale, I mean, as I sort of sit through your presentation, it seems that there wasn't really a whole lot of redesigning that you guys had to do, right? I mean, maybe some slight redesign with regards to the mixing and extraction side of things, maybe some on the purification step and the separation step. So the question is, would these sort of minor redesigns, a; and b, the lessons learned and time saving and potentially budget saving for future projects because of these potential sort of findings?

Dustin Olson: Yes. Hey. Thanks a lot, Hassan. Yes, I think the way you're thinking about it is right. Anytime you're scaling a new technology, there's always that chance that you start raising rates and you run into something that's going to require a lot of time or a lot of CapEx to repair. And as we started up the facility, we just didn't see that, okay? We did have some minor issues. I'll speak to that in a second. But like you say, I mean, the core technology is really about mixing, removing contaminants and then removing solvent. And as we performed those three core let's say, chemical engineering type technologies, they work, and they worked really well. So we're very excited about that. With respect to the minor items that we had, it's a myriad of things, Hassan. So I can give you lots of examples of things that happen. I would say the majority of them are very common to any startup, whether it's a new technology or not, okay? I mean any time you start up, you're going to have control valves that don't work quite right or regulators that are not set properly for the system. We had one situation where we needed to shut down the entire utilities plant to basically boot up a new program. That's similar to restarting your computer. But for a plant like this, it takes a bit of time. Where we did have some issues that were -- that we had to work our way through were in some of the piping around pieces of equipment. We had a little bit higher pressure drop in that system than what we expected and we redesigned the piping and implemented it in the course of July. That was actually a really nice, let's say, technical achievement by the team to adapt and to adjust. The other item was quite frankly, a small design problem with one of our Johnson Screens in one of our core operations. And that allowed some of the process to leak through where it wasn't supposed to and that required us to cycle down to get into that piece of equipment and fix it. But all these things are behind us. And so, what we did is through the course of the commissioning process, instead of pushing to get some minor rates, we've made the decision to really prep this plant for full rates. And so, we shut down, fixed a lot of things that were kind of on the list that we've been dealing with and came back up and have been running really well. With respect to lessons learned, absolutely. Okay. So, on the competency side, anytime you scale a technology like this, you don't really know exactly what you're going to see. You've got good fundamental understanding of the tech, but until you see it at scale, you don't know how to handle it. So on one hand, the competency development that we've had across our system has been exceptional. Our team out here really -- Dan spoke to that quite a lot. But our team really out here has been the right team, done a good job, but also learned a lot. And as it comes to applying the learnings to future plants, -- it's certainly going to help us in the start-up phase, because we're going to know what to expect before we start. So the startup will go much, much faster on future plans. But we're also learning a lot about our plant where a tweak here and a tweak there is going to give us basically two opportunities. One is we see several areas in our plant where we can cut significant CapEx. And also, we see several areas in our plant, where we can increase capacity with very minimal impact to the plant. So, I'm optimistic about our CapEx per pound. It's a tough environment with respect to inflation and costs in general. But I think we're going to have an opportunity to reduce cost and probably also increase capacity on future facilities. Thanks a lot for the question, Hassan.

Hassan Ahmed: Very, very helpful. And a quick follow-up. Can you talk a bit about, how you feel the commercial scale sort of facility has performed relative to the FEU?

Dustin Olson: It's performing better than the FEU, okay? I mean we have -- and we knew that on the front end. We've added a lot of design components to the commercial plant that we didn't have in the FEU, and quite frankly, the equipment that we have installed in the facility is a much higher quality than the FEU. One area, in particular, just to give you one example, which is -- there are several, but one example would be around the devolatization of our final product pellet. I mean, this is a really big deal. It helps to remove contaminants in the overall product, but it also reduces the odor of our final product. And we've talked about this quite a bit. When people would smell the FEU pellets, they would think, wow, this is good. And when we tested it, it looked good. But what we're seeing is that the performance of our final pellet here is even better than the FEU. And quite frankly, I'm extremely excited about that. I've got a lot of experience dealing with different industries and odor is very often a core component. And I think that's going to be a big opportunity for us to value sale in the future.

Hassan Ahmed: Very helpful. Thank you, so much.

Dustin Olson: Thanks, Hassan.

Operator: Thank you. One moment for our next question. Our next question comes from Noah Kaye from Oppenheimer & Co. Please go ahead.

Noah Kaye: Thanks for taking the questions and for the update. Clearly, the team has been living on this 24/7, and is it really helpful for us to see where you're at currently. And so my first question is kind of a two-parter that actually feeds from the last question, which is, first, around product quality and second around product run rates, right? So you mentioned the odor, but just so we all understand. Are the pellets that are coming out of the facility now of the quality that would get commercial acceptance from your customers? And if those attributes are actually better than contemplated in the agreements, what does that mean for customer demand?

Dustin Olson: Yes. We feel really good about the product quality, Noah. Any time you start up a facility like this, you're going to have some periods at the beginning where you have construction debris and different items that you have to clean out through the pipe, rust that's developing inside the pipe. And when we look at the products, we had some of that at the beginning. But the core component that we've been watching is the odor performance and that's been performing very well. With respect to the marketability of the product, yes, we feel very good about that. With respect to the ability to, let's say, upsell that from an odor perspective, we'll have to see how that goes, Noah. I anticipate a lot of interest in our product in markets that we haven't traditionally chased from an odor perspective, but we'll have to see how that plays out over time.

Noah Kaye: Not to show your hand too much, but can you talk a little bit more about that? What does having lower odor mean in terms of expanding your markets?

Dustin Olson: Well, I mean, one easy example is automotive. Another would be in -- let's just speak to automotive. I mean, no one wants to have -- there's a lot of areas in the world that do not like the new car smell. A lot of times, the new car smell is really the fossil-based plastic that is creating that smell inside the vehicle. And if we can perform better than fossil-based polypropylene on the odor front, which early indications indicate that we can then that's going to give us a jump into the cockpit of the vehicles type applications. That would be dashes, pillars, consoles, things like that. I think that's a really big opportunity that could open up for us.

Noah Kaye: Really interesting. So into product run rate, you mentioned you recently initiated the restart. So I'm guessing that where you sit today is a fairly low run rate relative to rated capacity. But can you walk us through where you sit and how you see this ramping? You reiterated commitment to a full month of 50% production by end of September. So obviously, you have conviction there. But just help us walk through what you're seeing now and what you expect?

Dustin Olson: Yes. It's important to note that in July, we were much more focused on fixing these items that were hanging us up a little bit so that we could reach full run rate. And what I'll tell you now is that we're touching the 40%, 45% level of capacity, and we haven't seen real top-end constraints yet. So as we get into August, I anticipate us pushing above the 50% level and working to knock out those next milestones.

Noah Kaye: That's great to hear. And last question just around -- there was a comment in the release around the expected margins kind of being in line with the budget that was provided previously. There can be a lot of moving parts of the cost structure and the revenue stack. But just what should give us or what gives you confidence in being able to kind of hit target margins as you build this thing to scale over the next several months?

Dustin Olson: Well, let's talk about cost, and then we'll talk about revenue. On the cost side, I think we're seeing indications, although, they're early that our variable cost structure is going to look good, if not a little bit favorable to the original budget, okay? I think that we're finding efficiencies, as we optimize the plant to pull down the utility cost. And so I think that's going to be good. Another core component to cost is feedstock and we're finding feedstock. Feedstock market has been down quite a bit this year relative to the last couple of years. And so we'll take full advantage of that. And quite frankly, given our flexibility on feed, I think that we'll have a notch better than others buying in the mechanical recycling market. So I feel good about that. The other item that we really haven't talk…

Noah Kaye: Got it.

Dustin Olson: Yeah. No, that's okay. The other item that we really haven't spoken quite as much about is on the revenue side. And while there are a lot of puts and takes on the overall deck, especially with respect to Ironton. We have a couple of things. One, we've got an increasing amount of feedstock plus contracts that we're applying to Ironton, which is going to help quite a lot. But more important to that is to, how we believe that we can value so. We've run several different feedstocks, in the plant so far. A couple of different grades of PIR, we even ran a little bit of PCR. We focus more on PIR, because of its consistency and it just allowed us to watch the data a bit closer. But the key thing is that the feeds that we ran in the plant so far, they all basically act the same which gives us a lot of confidence on the PCR front. And so most of the contracts that we have in place are mandating like a minimum of 50% PCR, but we know that the market is very excited about more PCR. And so the higher the PCR that we can put to the market, I think the better we'll be able to value sell our product. And so I feel good about the revenue side. The polypropylene market in general is down a bit, Noah. And so that's something that we have to watch. But I think that our product is in a league of its own. And I think it's going to carry a lot of weight in the market. Thanks.

Noah Kaye: Thank you.

Operator: Thank you. One moment for our next question. Our next question comes from Aadit Shrestha from Stifel. Please go ahead.

Aadit Shrestha: Hi. Good morning and thanks for taking my question. Just could we get an update on the general timeline of maybe the key milestones? I know you've talked about the 50% utilization, you'll meet that by September, but it looks like other things may have shifted a bit. When do you expect the performance test completion to occur?

Dustin Olson: Yeah. Look, we feel really good about the milestones. I think we'll be ramping above 50% within the next period of -- a short period of time. I think we'll have a shot at achieving the milestone in August. And if not, we'll close that milestone in September. With respect to the final performance test, look this is really the game that we have been going for. All of the work that we did in July was really about achieving this because it gives us a lot more flexibility in the overall system. And so we haven't really set a target date for that. I think that in the September, October timeframe is very reasonable for us to touch that test. Remember, it's a five-day test at 100% rates. And as we ramp up to get to that position, we'll know if we see any incremental constraints and look to work around them. But right now, with what we see across the system, I see no reason that's going to stop us from getting it done in September, October.

Aadit Shrestha: All right. Thank you. And just to follow up. Do you see any other process technology issues from startup that needs to be resolved or any other things that may pop up that we're not necessarily seeing right now?

Dustin Olson: Well, I mean, that's kind of a crystal ball question. I mean, the short answer is, I have no doubt that we will have other challenges in front of us as we move forward. Okay, that's the nature of this business. It's the nature of introducing a novel technology and that's what we've seen all the way through. What I'm confident in is our team and our ability to solve problems. So do we see other items that are out there now? Yeah, some nuisance things around the edges. But again, the core technology that really represents the power of the technology is working really well. And we're going to leverage that, pivot on that, and continue to grow. So I'm really optimistic that the majority of the heavy hitting headaches are behind us and we're going to be moving forward with pace now.

Aadit Shrestha: Thank you for taking my questions and good luck.

Dustin Olson: Yeah. Thank you so much. See you next time.

Operator: Thank you. Our next question comes from Eric Stine from Craig-Hallum. Please go ahead.

Eric Stine: Hi, everyone. I was just hoping to follow up on an earlier question about lessons learned as you bring Ironton online and at scale, any change to your thought on optimal plan size, I believe it's 130 million, is your expectation. And then also just curious, as you move forward and look at international markets, is there anything in those markets that would dictate a different plant size?

Dustin Olson: Look, I think that we've had a lot of theoretical discussions about what the optimal plant size would be. I think that when you helicopter up a little bit and think about the market holistically, I think there are cases to be made for smaller plants, and I think there are cases to be made for smaller plants and I think there are cases to be made for bigger plants. Obviously when you get into the bigger plants, you have the opportunity to spread the cost out across higher capacity and that helps you overall CapEx per pound and you can often offer quite a bit of feedstock flexibility by targeting one feed to a specific line and optimize that way. With respect to small, smaller plants I mean there's a lot of smaller markets out there that would love to have a facility like this that could reduce their dependency on imports from other regions. Okay. And so we're paying attention to both. I think from a technology perspective, what we're seeing is that since the core technology is so robust and effective, I think the ability to scale the inside components of our plant are pretty straightforward. We're going to have to look at the details, and I'm not prepared to make a comment on what we think future plant sizes could be today. But I think that we should be very optimistic about that. I think that once you've got a good handle on your core internal technology, then it's really just about operating a bit on the edges to increase capacity. So some natural constraints that we're going to have initially are extruder capacity, okay? We'll probably hit constraints there before anywhere else. But you can always add an extruder or you can always build a bigger extruder for future lines. We're not seeing mixing constraints. We're not seeing extraction constraints at this point. We're not seeing solubility management constraints. Those are good. And once you have clean control of that core portion of the technology, it allows you to think about scaling differently. So do I think that we could have a much bigger plant out there someday? Absolutely. And what impact will that be on our overall CapEx per pound, it will certainly drop it. And I think that when it comes to the overall position for us in the market in the long run, I think that's where PureCycle becomes very powerful, because once we know the technology works and we can operate it reliably like we're learning in Ironton, then it's going to be all about how can you get the CapEx per pound in control so that you can grow economically more sustainably. And I think that we are in a great position today to do that.

Eric Stine: Got it. That's helpful. And maybe last one for me. Just on the feedstock side, obviously, you've done a lot of work in the US. But just curious, I know it's still somewhat early, but curious the work that you've done or work that your partners have done in some of these international markets as those projects approach?

Dustin Olson: Yes. No, actually, this is one of the fringe benefits of thinking and going global early. As soon as you start opening that up, it just -- it gives people the reason to pick the phone up and to give you a call, okay? So in every region that we've mentioned about growing globally, we have feedstock -- potential future feedstock partners that are picking the phone up and giving us a call. And one great example that I'd like to use. When we were considering moving into Europe, one of the things that we heard a lot of was, it's going to be very difficult to find feedstock. You'll have a very difficult time finding feedstock because it's -- there's not enough of it. It's all being consumed and there's not any leftover for PureCycle. But within a couple of weeks of announcing our location in Antwerp, we had early indications of oversubscription for a single line and quite frankly, on our way to having enough subscription for two lines. And so I think that fundamentally, we are a technology that is agnostic when it comes to the type of feedstock. We handle a lot of different varieties. That's differential to almost all other players in the market. As a result of that, feedstock suppliers and aggregators, they see us as an opportunity to where they can go find a home for stuff that they've been looking at for many years. And so we find that our technology actually draws feedstock out of the market as opposed to shortens the market.

Eric Stine: Yes. That’s great to hear. Thank you.

Operator: One moment for our next question. our next question comes from Gerry Sweeney from ROTH Capital. Please go ahead.

Gerry Sweeney: Good morning, Larry and Dustin. Thanks for taking my call.

A – Dustin Olson: Yes. Thanks a lot, Gerry. It’s good to see you again.

Gerry Sweeney: The question -- obviously, a lot of questions on the operational front. But my one question is have you sent pellets for certification yet?

A – Dustin Olson: We have not sent pellets for certification of the commercial plant yet. But we are in active discussions with all of our key partners for their applications.

Gerry Sweeney: Got it. Okay. And then switching gears, Larry hasn't had a chance to talk too much, so I got a question too for him. Obviously, the project financing sounded as though that was kicking back into gear just curious if maybe you could let us know where stands and then in conjunction with that. It sounded as though in your prepared remarks, Augusta was one line. I'm not sure if I heard that right. I'm just curious if there were any changes. And obviously, that fits into project financing as well.

A – Dustin Olson: Yes. Thanks, Gerry. I'll answer the last part, and then I'll pass the baton to Larry. Augusta is -- it has the capacity for eight lines. We purchased long lead items for two lines, and then we are evaluating whether to attack one line first and then pull the second line in or to go after both at the same time. We've got -- that was a kind of a central discussion with the AEDA in terms of the overall timing and the package that we built with them, but they were very comfortable with us starting with one versus starting with two, which is where that narrative is coming from. And I'll pass it to Larry for the rest of the answer.

Larry Somma: Yes. Okay. Thanks. Gerry, it's a good question. If we learned one thing from our experience last year being in the market besides for the fact that it was a very difficult market we really had a strategy with one set of investors. And what we've done is we've pivoted our thought process for restarting by thinking about different avenues, so that we don't have all of our eggs in one basket. We have three different scenarios that we are thinking about and evaluating with respect to how we would close financing. What that does is it diversifies us so that we have choice, hopefully. And that choice should allow us to pick the scenario that's best for us long term, but also would get us to the finish line sooner. So the good news is with Ironton running tech risk removed, we have different irons in the fire, if you will. So we're really excited about that. But there's -- if there's one thing we know we don't want to get ourselves ahead of things because it's a tough market. So we're going to make sure that we're positioned well. We're probably going to be working to build momentum with some anchors, if you will, so yes, we're really excited to get going now that the tech risk has been removed. And the other comment I'll make with respect to what Dustin said, as Dustin alluded, we did get the approval from the AEDA for one line, financing for one line. We have been progressing long lead for two lines. So, as Dustin said, we've got a lot of flexibility. The most important thing is that, we got the agreement with the AEDA. And when we go to market, on a couple of different scenarios, we have flexibility, whether it's one line first, both together, et cetera.

Gerry Sweeney: Got you. That was my main question really was if the AEDA gave you the thumbs up, you're in good shape with -- no matter if you do one line or two lines, correct.

Larry Somma: That's right. Obviously, two lines, two lines at the same time is more revenue and profitability for us. So that will also factor into our thinking.

Gerry Sweeney: Got it. Okay. I appreciate it. Thanks for taking my call.

Larry Somma: Thanks, Gerry.

Operator: Thank you. One moment for our next question. Our next question comes from Thomas Boyes from TD Cowen. Please go ahead.

Thomas Boyes: Thanks for taking the questions. Great to see all of the kind of progress this quarter. First, a quick one on just 100% operating capacity deadline at the end of January, not the performance test. Is it similar to the 50% operating capacity? Is that something where you need to operate the facility 100% for a whole month, for a four-week measurement period? Is it simply just a pound per quarterly nameplate capacity? Just wanted to kind of understand the framework there.

Dustin Olson: Yes. It's similar to the current milestone, which is just pounds per month requirement by that date, yes.

Thomas Boyes: Got it. And then just a longer-term one. I was wondering, if you could talk maybe about the ability to leverage, say, the DOE loan for additional lines of Augusta beyond 1 and 2 because that process obviously takes a good chunk of time.

Dustin Olson: Yes. I mean -- so we're chasing a lot of different financing options for us. And in the case of, let's say, a long-term partner like the DOE and financing, we're certainly looking at that as a potential vehicle beyond two lines. It's one of these potential financing options that could be turned on for each line in series in Augusta. That's the idea. So you wouldn't necessarily have to go through the same process every time that you bring a new line on.

Thomas Boyes: Got it. No, appreciate the color. Thanks.

Operator: All right. I am showing no further questions at this time. I will turn the conference back over to Dustin for closing remarks.

Dustin Olson: Look, I just want to close, first of all, by thanking everybody for participating today and asking the great questions and more importantly, by following us and supporting us along the way. It seems to me like every quarter, we accomplished something newer, bigger and even more exciting. This quarter was no different. And I mean, given the success that we found with our technology combined with the growth, the quality and the resolve of our people, today represents a true inflection point for our company. And while we're extremely proud of where we are today, I believe future updates will even be more rewarding. Thank you for joining the PureCycle team and helping us to create a pure planet.

Operator: This concludes today's conference call. Thank you for participating. You may now disconnect.